Cast Iron Cooking Tips

These days many folk are steering away from Teflon coated cookware and moving back to stainless steel,  stoneware, or cast iron cookware.  Often new buyers of cast iron quickly find out that cast iron cookware is not what they assumed it was. Cast iron is an extremely versatile cookware and with the proper knowledge, the cookware is deliciously rewarding to cook with.  It is my hope to highlight a few tips to ease the transition to cooking with cast iron. IMG_2096

Tip 1:

Make sure the new cast iron cookware is properly seasoned.  Check out my previous blog Restoring Cast Iron to better understand how to season cast iron cookware.

Tip 2:

Allow time for cookware to preheat.  One should be able to drop a bead of water on the hot cookware and the water will quickly evaporate.  If so, the cookware is ready.

Tip 3:

Use liberal natural fats.  My preferred go to is butter. I have also has success with coconut oil as well. (A well preheated and greased skillet will provide a nice non-stick cooking experience for most non-acidic items.)

IMG_2400

Tip 4:

If you cook with your cast iron cookware often, cleaning can be simply wiping the cookware off and placing back on the cook top or stove to dry a bit.  It is not necessary to use soap to clean cookware, but if rinsing and soap are necessary, use a mild soap and be sure to dry the cookware well before storing.

Tip 5:

Be sure to apply small amounts of oil on the entire cookware after drying the cookware. Keep in mind, if you do not use your cookware often, it is not recommended to use butter, ghee, or lard to season or oil the cookware with.  If the cookware is to be stored for longer periods, it is recommended to use canola or flax seed oil.

IMG_2532

Tip 6:

Cast iron has the ability to get extremely hot and also retain that heat for longer periods of time.  Because of this, it is important to have proper hand protection.  Personally, I like the silicone handle covers.  But also find myself using heavy duty kitchen towels as well.

 

Remember to use CAUTION when working around high heat.

Shinola Detroit Journal

Shinola Detroit is on a mission to create American jobs by manufacturing goods right here is the good ol’ USA. While Shinola is known more for their American made vintage style bicycles and high end watches, Shinola also makes quality journals. More information about Shinola Detroit can be found here:

Shinola Detroit

The journal features a warm and appealing fabric cover similar to the books in the days of old. This is perfect for the nostalgic writer! Journals are available in hard and soft covers and in multiple colors.

Upon first opening the package from Shinola, one is greeted with a visually pleasing, well packaged arrangement,  as shown below.

For no additional fee, one can have initials embossed on the journal.  I feel this was a great personal touch and adds to the journal.

After several months of writing in this journal, I have been very pleased.  I now own several of their journals for work and personal use.  The medium journal is perfect for everyday writing and works great with a wide variety of pens. The small journal is good for pocket carry and seems to work better with rollerball pens and pencils (this is mostly due to writing space).

Fountain Pens-The paper is thick and smooth for the custom fountain pens I normally write with.  I found that my medium and broad pens seem to feather and bleed through (Using Noodler Eel Ink, a generally wet ink). However, my everyday fine and extra fine pens with Noodler Eel ink do excellent on this paper.

In short, I highly recommend Shinola Detroit for a high quality, handmade journal.

 

Restoring Cast Iron

With Cast iron cooking back on the rise, Lodge Cast Iron has created a short video showing how to restore cast iron pots and pans. This method works for all brands and makes of cast iron.

Armed with this information provided by Lodge Cast Iron, the next time you come across a rusty cookware you can confidently take on the project and bring the cookware to life again!

Tips and Tricks for Fly Fishing

Wader Changing Mat

 

I  carry an extra car floor mat to stand on while changing into and out of waders.  However, Simms currently offers a really nice wader mat and bag called Headwaters Taco Bag as an alternative. There is nothing worse than having rocks in your socks or wader boots. Rocks and debris can puncture the stocking-foot portion of the waders and cause a good day to become a bad day.

Chair

 

I learned from an experienced fisherman that it is much easier to change ones waders when sitting down in a chair.  For this, I prefer the REI Ultra-light camp chairs or my trusty Yeti Roadie 20.

Wader Repair kit

simms-wader-repair-kit

Though, I have yet to rip a pair of fly waders on the water, I do keep a repair kit close by.

Container

rubbermaid-container

Use a large container to store and organize your fishing gear. I prefer the Rubbermaid Roughneck series. This has greatly reduced the likelihood of me forgetting important essentials.

Forceps

foreceps

These handy tools are excellent for tying small midges to fine tippets, and handling the tiny 5x-6x tippets. I prefer the 5 inch forceps as they offer a bit more gripping surface.

Polarized Sunglasses

smith-optics-gc

I highly recommend glass lenses as they are more scratch resistant and are often more durable in the event when a beadhead nymph comes crashing into your face. To date, Smith Optics Guides Choice  shades have been my go to’s for clarity and quality.

First Aid Kit

It is smart to be well prepared. I keep a safety kit in my vehicle at all times and am prepared for everything from snake bite to accidental self-hooking.

Extendable Magnetic Retrieval Tool

magnetic-tool-extractor

This little tool works great for recovering those precious flies that get hung in vegetation or those forceps/nippers on the bottom of the river. Best part, This tool costs less than 5 bucks at Harbor Freight and you don’t have to take a swim in the icy cold water to retrieve these valuables.

Ultralight Stove

On those cold days, there is nothing like a piping hot coffee that was freshly brewed. This is why I often carry a MSR Windburner with the coffee press in my gear container. It has made cold days much more bearable. Plus, one never knows when boiling some water may be needed.

 

 

Coffee Beans

History – Legend vs. Facts

“The legend says the goat herder Kaldi first discovered the potential of these beloved beans.

The story goes that that Kaldi discovered coffee after he noticed that after eating the berries from a certain tree, his goats became so energetic that they did not want to sleep at night.

Kaldi reported his findings to the abbot of the local monastery, who made a drink with the berries and found that it kept him alert through the long hours of evening prayer. The abbot shared his discovery with the other monks at the monastery, and knowledge of the energizing berries began to spread.” (NCA)

While there are many legends of how coffee was discovered, the credibility of the legend has not been confirmed.  What we do know is, coffee has been around for many ages.  It was first cultivated as a crop on the Arabian peninsula around the 15th century. From there, it spread from Asia to Europe and throughout the globe. To date, there are two distinct types of beans that are cultivated for commercial use. From these two strands, all commercially available blends and varieties are derived  and each has their own use.

Coffee Arabica

“Coffea Arabica (Arabica), pronounced either a-rã-bik-a or ar-a-bë-ka. This species makes up about 70% of the world market for coffee beans. Being a higher value taste, this fancy grade coffee bean is sold mostly through specialty coffee shops. Arabica being grown on steep terrain makes mechanical harvesting impossible. The hand picking ensures a better quality of selection with less under/over ripe beans being selected.” (Peter Baskerville)

Coffee Robusto

“Coffea canephora (referred to as Robusta) This high caffeine content species makes up about 27% of the world coffee bean market. Being a cheaper to produce coffee bean but with a lower taste profile, this coffee is often sold for use in instant coffee. It is produced primarily in Indonesia, West Africa, Brazil, and Vietnam. Also known by botanists as Coffea bukobensis A. Zimm., Coffea canephora Pierre ex Froehner var. kouilouensis Pierre ex De Wild., Coffea canephora Pierre ex Froehner var. sankuruensis De Wild., Coffea robusta L. Linden (GRIN), Coffea robusta L. (Smit). Is commonly known in the trade as Congo coffee or Congo coffee tree (USA).” (Peter Baskerville)

Uses

Arabica – Required for a “proper”  espresso and is highly sought after for it’s rich taste. Often found in specialty coffee shops with a higher price tag.

Robusto- Cheaper, lower taste profile and is often found in instant coffee. Most commonly found in big box retail stores.

Blends- often a blend of the two to obtain a lower cost and better flavor. Blends make up the bulk of the coffee market and are sold everywhere from big box stores to specialty shops.

Citations

NCA – http://www.ncausa.org/About-Coffee/History-of-Coffee

Peter Baskerville – https://www.quora.com/What-are-the-different-types-of-coffee-beans

MSR Windburner Camp Stove

 

Overview

The MSR “Windburner” packs all into the boiling canister which makes for a neat and tidy package. This stove was designed for use in backpacking and remote situations where the added weight of tabletop gas stoves are not beneficial.  Quirks aside, this is a handy gadget to have on hand.

Setup

Setting up the Windburner is not too complex. It does require some tinkering to assemble.  However, it can be quickly assembled in under 60 seconds once the operator is familiar with the apparatus.

1.) Open boiling Canister and remove parts stored.

2.) Attached 3 pronged base to gas canister.

3.) Attach gas canister to burner.

4.) Attach all accessories  needed to cook, in this case a coffee press.img_0384

Lighting

Lighting the Windburner proved to be a bit more difficult to light than originally hopeed for. At first, a piezo-electric starter was used with absolutely no success, whatsoever. After several attempts, the easiest and safest method found was to use a fire-steel or long match. The traditional cigarette lighter tends to put ones hands in dangerous proximity to the intense gas flames and can cause a serious burn.

Usage

Once lit, the Windburner really shines!  this stove works well in the wind and wet elements. I was able to bring water at 68 degrees to boiling in approximately 3.5 minutes. So that meant I was able to enjoy my coffee in under 5 minutes. This proved to be perfect for those cold mornings on the trout stream or after those bone chilling hours in the deer stand.

Vedavoo Beast Sling Review

History-Scott Hunter

Inspired by his own experiences and frustrations he had with gear, Scott Hunter founded VEDAVOO in 2009. Without formal design training or a background in sewing, Scott used the company’s last $700 to buy a used, 1970’s era sewing machine on Craigslist, and taught himself to build packs in his garage. Custom projects refined his craft, and in time, he followed a traditional hands-on approach to designing a line of packs for fly fishing. Since that time, products like the Tightlines Sling Pack, Spinner Daypack, and Chest Pack have shown that durability, versatility, and ease of use set VEDAVOO apart from other gear builders. In over 5 years of building gear, the company has never received a return due to quality of materials or workmanship. This is possible because all gear is meticulously crafted using only the best American Woven fabrics, and American Made webbing, fasteners, buckles, zippers, and hardware. Even the thread used to sew the packs is American Made. Though the road is challenging, we don’t compromise. We build BETTER AMERICAN GEAR.  Vedavoo Homepage

Fit

I am 5′ 9″ and about 215 lbs. and the standard Right hand sling conformed to my body quite well. I was surprised at how well the fit was, especially with fitting over my waders and additional gear. The pack does well to stay in place while trekking the trails to the fishing hole, fishing, and wrangling fish to the net. 

Functionality

As expected, the pack does not get in the way of the wearer. The pack holds about 3 bugger barn boxes or 1 beast jr. box which is good for the type of fishing I usually do. The tippet holder does well and does not lose my tippet spools as some other packs have done.  I did come to appreciate the unique hidden pouch that runs behind the main compartment. This pouch was perfect for storing a map, GPS unit, snacks and lunch.  I would have preferred a strap or cordage to allow for a more secure method holding of my water bottle and a better location in which to hang the net. I believe this pouch was designed for the Liberty bottles and I did not have one on hand at the time of this trip.  While I am aware of that  Vedavoo also makes a net holster called the Netster for net retention I prefer my net to be secured to my pack. That said, I enjoyed being able to fish without the weight of a heavy vest weighting down my shoulders.
   

Craftsmanship

The detail of stitching stands out on this pack. All stitching was tight, clean and intentional. Each pouch is well thought out  and well placed within the available space of the pack.

Conclusion

Overall this pack is excellent and functions very well.

Pros

  1. Customization available
  2. Solid construction
  3. High quality
  4. Comfortable fit

Cons

  1. Net is awkward
  2. No water bottle secure strap
  3. no designated place for fore-snips

 

Go Check Vedavoo out and give their products a try!

Stay safe out there!

Kalob

 

Pursuit-The Necessity of Outdoors

Being the son of a third generation carpenter, creative design and fabrication is in my blood. And being an engineer, I often draw inspiration from simple objects and patterns I find in the outdoors. Not only do I find inspiration, I also find that the outdoors provides relief from stress and clears the mind. I would speculate that this is among the many reasons people enjoy the outdoors. In this post, I would like to elaborate on why many men are passionate and even obsessive about the outdoors.

IMG_2953

In the modern workplace, many men are often chained to a place of manual labor: i.e. sitting at a desk all day, or constantly on the phone and in meetings. This environment often causes the common work days to become stagnant. And in a seemingly stagnant workday, it is hard for one to feel inspired, or even tap into those creative ideas due to the energy spent on simply trying to get through the day or even week. Oftentimes, this contributes to many health related issues like a lack of energy and reduced productivity. 

img_1664

Men, in general, are wired for adventure. Whether chasing wild trout, photographing spectacular views, achieving a personal milestone, or even hunting the prey of choice, many men thrive where they are engaged in pursuit. The outdoors often sets the stage of pursuit by providing opportunities for family adventures, hunting, fishing, or perhaps conquering the local hills and mountains. The challenge and thrill of conquering an obstacle brings a deep sense of fulfillment that is difficult for many to put to words. In his book, Wild at Heart, author John Eldredge, references the creation of mankind, pointing out that men were created by God in the wilderness and then placed in the Garden of Eden, while women were created in the garden. This makes sense to me; it explains why men are seemingly more comfortable in the wild places and women seem to be more comfortable in the safety of cities.

img_0131

It is in the solitude of the outdoors that many find the time to process the emotions, thoughts and ideas that often surge through one’s being. I am convinced that, for many men, emotional maturity is cultivated though the serene environment of the outdoors. I have heard countless stories of veterans who found help and healing in the tranquility of the outdoors and the relationships formed through the outdoors. It is my opinion that where we are immersed in the creation of God; we are able to fully admire His handiwork, and, in the process of admiration, we find healing for the broken places of our lives. 

img_0128

In closing, I would like to invite you and your loved ones to make time to enjoy the outdoors. Explore the hills, immerse yourself in the water, pursue your dreams, and be sure to stop and smell the roses. You only have one chance at life! Live, dream and impact those around you with your unique gifts. Remember, God loves you and…

“Adventure is out there!” –UP

 

Fly Fishing the Caney Fork

In August of 2016, a few buddies and myself decided to go check out the Caney Fork in Tennessee for some late summer tail water action. We had been in the dead of winter and the fishing was tough, so our expectations were low. Boy, were we in for a treat!

We arrived on location about 15-20 minutes after daylight, to our delight we were the second vehicle to park in the area. 

The day started off at a cool, crisp 68 degrees Fahrenheit. The high for the day was forecast to be 91 degrees Fahrenheit, and a beautiful bluebird sky. Sun not yet risen and a cool mist was rising off the surface of the water,things were shaping up nicely!

As we geared up, we spotted a doe and little two spotted fawns, a good sign. Once geared up, we slowly made our way to the waters edge, to be greeted with crystal clear water and a bald eagle soaring above. This was another good sign!

After carefully studying the water for a few minutes, subsurface trout activity was spotted! Quickly, we tied out flies and began presenting our offering. After a few casts, the lines went tight and the fight was on!

As the day wore on, more trout were caught, predominantly aggressive brown trout. Several chunky  rainbows were also in the bag.  The tandem rigs seemed to produce the best results, rigged with weighted fly on bottom and a non-weighted fly on the top. 

The rainbow in the photo above was one of the larger rainbows, measuring around 14 inches and gave an awesome display water acrobatics.

The brown trout fought strong and hard, I was very surprised in the strength of these little fellas.When the bag is mixed and the fish are healthy and strong, it makes for a fantastic day on the water! I was pleased with the clarity of the river and the health of the fish. TWRA and TVA are doing a fantastic job managing this tail water.

The gear of my choice is noted in the photo below. While I prefer to stick with all American Made, unfortunately that is simply not economically possible at the time being. Below is a list of my top gear:

  1. Smith Optics Guides Choice sunglasses
  2. Filson Tin Packer hat (Made in USA)
  3. Vedavoo Beast Sling (Made in USA)
  4. Cliffs Jr. Beast and  Bugger Barn (Made in USA)
  5. Orvis Boots and waders
  6. Abel Nippers (Made in USA)
  7. Yeti Tundra Roadie 20 (Made in USA)
  8. Temple Fork Outfitters Professional II 9′ 5wt rod
  9. Ross Reels CLA (Made in USA)
  10. Scientific Anglers WF 6F (Made in USA)

img_1017

Be sure to check out the gear listed, I feel confident you will not be disappointed. Stay safe out there and have fun!

 

Made in America

If you are like me, you appreciate quality american made brands.  You take deep pride is what you own and the heritage behind said item. It is not the brand that is important, but the heritage and what the brand stands for that one can take deep pride in. Many established American Brands have deep roots and rich heritage, and when one purchases a product from these companies, they are supporting the brand and history behind the brand. In the following, I would like to share a few companies worth taking a look at (Please note the company stories below are not written by me, I have compiled the brief history of each company’s history page onto one blog, in hopes to share the story and heritage of each company). I have either owned or used many of the products below, and have been pleased with the quality. These companies are Engineer Approved! Check them out!

 

Vedavoo – Better American Gear

Inspired by his own experiences and frustrations he had with gear, Scott Hunter founded VEDAVOO in 2009. Without formal design training or a background in sewing, Scott used the company’s last $700 to buy a used, 1970’s era sewing machine on Craigslist, and taught himself to build packs in his garage. Custom projects refined his craft, and in time, he followed a traditional hands-on approach to designing a line of packs for fly fishing. Since that time, products like the Tightlines Sling Pack, Spinner Daypack, and Chest Pack have shown that durability, versatility, and ease of use set VEDAVOO apart from other gear builders. In over 5 years of building gear, the company has never received a return due to quality of materials or workmanship. This is possible because all gear is meticulously crafted using only the best American Woven fabrics, and American Made webbing, fasteners, buckles, zippers, and hardware. Even the thread used to sew the packs is American Made. Though the road is challenging, we don’t compromise. We build BETTER AMERICAN GEAR.    https://vedavoo.com/

 

Travax – Made in USA

Our Mission:

To design for longevity, inspire to action, and give from passion; to drive a greater love of the outdoors to humankind.

Trayvax was started by founder Mark King in 2013. Years earlier, Mark set out to create a product that would cut down on plastic bag waste. What began life as a reusable plastic bag carrier became, through many prototypes and revisions, something completely new to the world: the Trayvax wallet. Designed to withstand the toughest conditions – and offer the most utility of any wallet, metal or otherwise, on the market anywhere – Trayvax wallets are built from the highest quality materials and assembled by hand here in the USA.

Just a few years ago, Mark was machining every Trayvax wallet by hand and powder-coating the aluminum faceplates with a small counter-top oven. Today, Trayvax is a company of over 35 employees working between two buildings, assembling, packaging, and shipping several hundred wallets a day. Having expanded the Trayvax line to include the Element, Summit and Axis models, as well as a host of top-quality accessories, we plan to grow and we’re excited to reveal what’s coming next.
http://www.trayvax.com/

Rowe’s Leather

Rowe’s Leather was started in 1955 by James “Doc” Rowe, a Hope, Arkansas police officer, in a small storage shop behind his house with the original intention of building saddles as a hobby, but he quickly saw the benefit of his ability to also build his own police gear and it didn’t take long for the area folks to notice the quality leather goods he was putting out. The business took off and the demand for Doc’s leather goods grew. Before long, he was building saddles and saddle tack, belts, police gear, billfolds, and other odds and ends. After suffering a heart attack and enduring bypass surgery in 1974, Doc’s doctors medically retired him from the police force and also from the leather business. In accordance to doctor’s orders, he sold his sewing machine and burned all of his patterns, rendering it next to impossible to do leather work and lessening the temptation to jeopardize his health by doing so.

In 1977, Doc’s son Kenny Rowe concocted a brilliant plan to get Doc out of the four walls of his house and back to enjoying the hobby he’d had in the early days. Since Doc’s health was good and his passion for leather work was still there, Kenny decided he would re-open the leather shop and have his dad teach him everything he had taught himself about the leather business. They worked side-by-side for almost 6 years, and then one day Doc came in one and told Kenny he wasn’t working anymore. He felt Kenny knew enough about the leather business without him being there. Kenny continued to work alone at the leather shop part-time for the next 11 years. During this time, he established a name for himself as one of the top-notch makers of leather goods in the area and began reaching a group of clientele beyond the borders of Hempstead County, or Arkansas, and even the United States.

When Kenny decided in 1994 to quit his full-time job and make Rowe’s Leather into his sole livelihood, it was a gamble and a heavy consideration, but he had faith that his skills and abilities would carry him through. Shortly after Rowe’s Leather became a full-time operation, Kenny recruited the help of his young son Cody, who began helping in the shop and learning the art of making leather goods. Cody enjoyed working in the shop when he could and worked weekends and after school to help out. Cody worked with Kenny part-time and all through high school and college, and upon graduating from Henderson State University in Arkadelphia, Cody made the decision to follow his dad’s career path and become a full-time leather craftsman.

In 2003 Rowe’s Leather was relocated to newly-built shop which is much larger and in a more prominent location, right on Highway 29, just south of Hope. Today, you can find Kenny and Cody working side-by-side to produce not only leather goods of the best quality, but of superior artistry, you can buy nearly anywhere. You can attribute this to several factors, only using the best leathers and hides tanned in the U.S., the care and consideration that are put into your wants and needs when you place your order, and the fact that only one pair of hands construct your product from start to finish. And it doesn’t hurt that these hands are some of the finest in the business. Rowe’s Leather

 

 

Keybar

I had been a chief engineer for 13 years at upscale historic district hotels in Savannah, Georgia. I had the keys to everything in the building, everything on the property – countless keys that I carried on a large ring attached to my belt. I jangled as I walked.

It always amazed me how the guys who worked under me were always busy, never messing around when I’d come into the maintenance shop. I wrote it off as hiring the right people, but deep down, I knew better. One day I walked into the restroom and someone in a stall said, “Hey, Mike, where are we going for lunch?” It was one of my guys, and he’d asked me the question even though there was no way for him to know it was me. Except for the jangling keys. That’s when it hit me. Everyone knew I was coming. They could hear my keys!

That’s when I knew I had to STOP THE NOISE! And that was the day I came up with the idea for KeyBar. As someone who carried a multi-tool daily and lots of stuff in my pockets, I knew there needed to be a pocket clip, and it needed to hold some tools, too.

It took plenty of trial and error. I tried all kinds of different designs and eventually settled on the KeyBar shape. The biggest challenge was how to fit a bunch of keys into a single KeyBar. I knew if the keys could stack on each other, I could make it work. It did!

So, I started selling early KeyBars to friends and friends of friends. I soon found that there were plenty of guys out there like me who couldn’t stand the noise, either. They just didn’t have a solution. They loved their KeyBar, and they’d call me because their buddies wanted KeyBars, too.

Then I started adding custom designs to my KeyBars, and I tried making them out of different materials. Aluminum was the first material, but I wanted titanium. Then I had to try carbon fiber. Each KeyBar was different. I tried different materials, different treatments. They were almost like works of art. I’d post them to Instagram, and pretty soon I had quite a following. We added a few accessories, and it took off even further.

I left my job in July of 2014. Jessica, my wife, left hers that December. We kept finding more suppliers to help us make parts. We kept buying bigger and faster machines to make components. Then, retailers were calling. Everyone wants a KeyBar! I have no idea where this will all go. But I can’t wait to find out. We’ve hired our first set of employees, but we still can’t keep up. I feel like I’m living a dream. The American Dream! Bottom line, I thank everyone who wanted to stop the noise and bought a KeyBar.

 

 

Yeti

GROWING UP, MY BROTHER AND I always had a passion for the outdoors. Hunting. Fishing. Traveling to outdoor industry trade shows with our teacher-turned-entrepreneur father. We were raised with an appreciation for wild game, unfamiliar territory, and high-quality gear.

But the coolers that were out there just weren’t up to our outdoor adventures — the handles would break, the latches would snap off, and the lids would cave in. Not only was it a hassle to replace our coolers after each season, but also these cheaply built, ordinary ice chests were limiting our good times. And that frustration led us to a solution.

In 2006 we founded YETI® Coolers with a simple mission: build the cooler we’d use every day if it existed. One that was built for the serious outdoor enthusiast rather than for the mass-discount retailers. One that could take the abuse we knew we’d put it through out in the field and on the water. One that simply wouldn’t break. We decided early on that product innovation would come from necessity and firsthand experience — not from market research and data analysis. And we’d never sacrifice quality for a few extra bucks. Because having your cooler’s lid cave in when using it as a casting platform should never be part of anyone’s fishing trip.

We’re so glad that we weren’t the only ones looking for a YETI. Today it is the cooler of choice for outdoor enthusiasts, pros, tailgaters, and backyard barbecue kings. And that still gets us fired up. Ultimately, life is about having a good time doing what you love. And for us, that’s being outdoors hunting whitetail, catching a tarpon on the fly, and spending time with our families and buddies. We’re wild at heart. So our coolers couldn’t be anything less.

 

Orvis Fly Rods

Founded by Charles F. Orvis in Manchester, Vermont, in 1856, Orvis is America’s oldest mail-order outfitter and longest continually-operating fly-fishing business. Privately owned by the Perkins family since 1965, today Orvis is an international, multi-channel retailer with more than $340 million in sales (2012) and approximately 1,700 employees. In addition to being the world leader in fly fishing, Orvis is the purveyor of the Distinctive Country Lifestyle, offering a wide assortment of men’s and women’s sportswear, fine gifts and home furnishings, luggage and travel accessories, dog beds and other pet items, as well as fine shotguns, gear, and technical apparel for wingshooting and sporting clays. Orvis sporting services also include fishing and shooting schools, an international sporting and eco-travel agency, and the Orvis-endorsed network of lodges, outfitters and guides. Our award-winning website, orvis.com, offers more than 5,000 products with 11 million visits/year. The company mails more than 50 catalog editions each year, with a total annual circulation in excess of 55 million. As of 2015, Orvis has 69 retail stores and 10 outlets in the US, and 18 retail stores in the UK. Our wholesale division services more than 500 independent dealers worldwide. The Orvis blog (orvis.com/news) offers a wide variety of editorial and educational content to over 1 million visitors per year, with extensive articles and videos about fly fishing, wingshooting, dogs, conservation, and more. Our Learning Center (howtoflyfish.orvis.com) provides the most comprehensive collection of online videos and resources devoted to teaching the world how to fly fish. Orvis donates 5% of pre-tax profits every year to protecting nature, supporting communities, and advancing canine health and well-being.                                                          http://www.orvis.com/s/about-the-orvis-company/261?dir_id=35438

 

 

Primo Ceramic Grills

It all began with an American tourist and a turkey.

kamado-old-model

When George Samaras completed his tour of duty as a pharmacist in the Greek military in 1986, he needed to find a career so he turned to his love of the sea. He began racing sailboats and captaining a yacht for tourist excursions throughout the Greek islands.

In 1988, he met his future wife Kelley, an American who was vacationing with her family and had chartered Samaras’ boat. George was taken with Kelley and they stayed in touch after she returned home. She eventually moved to Greece and later the two were married. Seven years later, the couple decided to move to the United States.

George’s father-in-law had a Kamado cooker and on Thanksgiving Day, George had roasted turkey for the first time. He was amazed at the juiciness and delicious flavor of the bird that was cooked on the kamado. It looked and performed unlike any grill he had ever used.

He bought a kamado for himself and cooked on it regularly. He told his friends and family about it and began shipping them back to Greece for them to use. Eventually George had over 80 people in his homeland that wanted a kamado, so he asked the manufacturer if he could start a distributorship in Greece, but they declined.

Not to be deterred, George saw a niche in the market and decided that he would make his own kamado cookers. Many people, including ceramic engineers, told him that it couldn’t be done, but he pressed on and spent the next several years developing and testing his own formula for the refractory material to get the right blend.

In 1996, he was ready to sell his ceramic grills. Samaras chose the name, “Primo”  which means “the best” in Italian. His first manufacturing facility was a 700 sq. ft. space he rented. Due to the limited space he could only make two grills at a time and he had to drive across town to a kiln to have them fired.

Over the next several years, the Primo kamado style grill grew in popularity as word spread about their quality and as the only ceramic grill made in the United States.

Samaras has a love for improving his ceramic grills and innovative products and in 2000 he introduced the Primo 2000, a combination gas and ceramic grill. His idea was to use the superior heat and moisture retention characteristics of a ceramic grill and the convenience of gas as a heat source that so many outdoor cookers prefer.

It was an unrivaled product never before seen in the industry, and over 700 were sold. Production was discontinued a few years later due to the shipping and assembly requirements.

George was also looking beyond the round shape of the traditional kamado and discovered that an oval-shape offered a much higher cooking versatility and efficiency. It forever changed the direction of Primo.

The introduction of the patented oval-shaped grill in 2002 established Primo as a major manufacturer in the ceramic grill market.

Today, Primo is headquartered in a 92,000 sq. ft. facility in Tucker, Georgia where their ceramic grills are produced. Primo is available in more than 24 countries around the world. Primo Ceramic Grills

 

 

Rising  Fishing

In 2004/05 Dylan Rothwell started RISING. Previous work with Vortex Backpacks and William Joseph had given him confidence in his own design skills, as well as a love for the outdoor recreation market. From the beginning, the focus at Rising was to design and build products that would improve the fishing experience – be that on the water, on the road, at the tying table, or chilling by the campfire.

Our first products shipped in Jan 2005, and we continued to march to our drummer for four more years. In 2009 we entered into an exclusive distribution deal with Umpqua Feather Merchants. As the largest manufacturer of flies in the world, they were a natural partner for us: they were large, well funded, well staffed and had room in their large warehouse – we were small, cash strapped, and had run out of room in our basement. The arrangement worked well for both companies – but in summer of 2012 we made the decision to go our separate ways.

As of the summer of 2012 we are now back flying solo, and marching to our own beat (which is reggae oriented friends). We did so because we have re-committed to manufacturing as many of our designs in house as is feasible. In house production required new machines, new warehouse, and new partners.. We’ve expanded the ranks with incredibly diverse talent – Mickey, Lance, Robin, Rancher, Fischer, Whalen, and Erin to name the most prominent.

In 2013 we branched out into something a little less kown to us, BBQ Tools. Pops Q Tool is our newest pursuit, a quality all American made tool made to last!

THE FUTURE LOOKS BRIGHT    http://www.risingfish.net/

 

 

Anvil Scissors

Who is Anvil USA Inc

Anvil Industries was a customer of Vogel Brothers Corporation in the barber and beauty field 25 years ago. The assets and name of Anvil Industries was then purchased by David and Don Vogel through a corporate buyout, the name remained the same but we re-branded as Anvil USA. Vogel Brothers, as a brand, was hidden from recognition by the structure of private label manufacturering but Anvil USA was not. It was a separate entity and was established as such. After meeting with much resistance on this bold move within Vogel Brothers existing customer base, it was necessary to divest Anvil of its Barber and Beauty sales due to the aggressive atmosphere. Anvil USA’s fly tying scissors were then created and marketed to the consumer through a network of dealers and distributors. Five years later, Anvil USA’s brand slowly emerged in the pet grooming field. In 2012 Vogel Brothers Corporation was sold and the Anvil USA brand was purchased along with inventory and needed machinery by Don and Barbara Vogel. The corporate name and brand is Anvil USA. We currently sell worldwide to individuals, dealers and distributors. Anvil USA is continuing the shear manufacturing tradition of which Vogel Brothers built its business upon some 325 years ago. We are passionate about the quality of Anvil USA’s tools and the families they support during their lifetime of use.

Anvil USA

 

 

Renzetti Fly Vices

Renzetti Inc., is a family owned business that started its operations in Romansville PA in the early 70’s.  I started making fly tying hand tools in a one car garage. Frustrated with the fly tying vises that were available at the time, I started working on the Presentation 3000 with the input and support of my brother Robin, that was not the first vise designed by  Renzetti, however it was the first True Rotary vise made. Since its beginning, the Presentation 3000 became the vise of choice of the elite and at a  retail price of $199.95 it was the most expensive vise available. By 1977 my hobby had become a part time job, and in 1978 I resigned full time job to open Renzetti Custom Machine’s doors in a now 3 car garage. Eight years later,  a new manufacturing facility was build and in 1988 Renzetti Inc, as it in know today, was formally introduced.

Since the early 70’s Renzetti’s hand tying tools and fly tying vises were seldom mostly heard of and very few shops were carrying it. The Orvis Company was my first retailer and where I met my long time friend John Harder.  By the late 80’s the Traveler and the Presentation Series Vises were introduced and Renzetti started attending the consumer and manufacturing shows.  By attending these shows I was able to be in direct contact with many tyers from around the world and listen to their feedback and suggestions.

In 1991, I met Bob Popovics at a fly fishing show in Carlisle, Pennsylvania. I had heard of Bob and was so excited and anxious to meet him. I waited patiently by his booth to introduce myself and when I did he mentioned that his Presentation 3000 needed some T.L.C. I took his vise to my room that night and brought it back to him the next morning. Our friendship started and so did the development of the Master Series Vise. In 1992, I made the few prototypes of the Master vise and gave one to Bob Popovics, Lefty Kreh and the late Matty Vincenguerra to tie on it and give me feedback. Then in 1994 The Master Series Vise was introduced.

In 1996, tired of the long cold winters in Pennsylvania I moved with my family and Lois and Ed, two of our key associates to Titusville, FL., and Renzetti Inc. found a new home at 8800 Grissom Pkwy.

Renzetti Inc. currently employees 10 associates, including myself, Lily and our 18 year old son. We have a well trained, wonderful, caring staff that makes everything possible. Our primary business is the manufacturing of the finest fly tying and rod building equipment in the world, but we also provide engineering and manufacturing services to many other industries around the country. Renzetti, Inc. owns many patents and trademark and was the first fly tying vise manufacturer to offer a True Rotary Vise.

Fly fishing, my hobby, has given me more that I ever expected. I have met the most wonderful people and cherish the friendship generated from our association with the sport. I am grateful to the many tyers and rod builders  of yesterday and to those that keep promoting this beautiful art. I believe that one of the reasons for our success is because we listen to tyers and rod builders while providing you the very best equipment that challenges your creativity. Changes to our product come as a result of  our desire to keep you excited in the sport, and always asking for more.

So regardless if you are an old friend of Renzetti or a newcomer to the fly fishing or rod building  we welcome you, to the art of fly fishing, the driving force behind all Renzetti products. We thank you for your support and want to reaffirm our commitment to providing you, the tyer and the rod builder, the absolute best in product and services.

We take great pride in the fact that every process of our product line is made in the USA.    https://www.renzetti.com/index.php/about-us

 

Conclusion

In closing,  I would encourage you to go check these places out for yourself.  They may have just what you need and the best part is they are made right in America with American Pride!